FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 190 of 597
6.5.2
Port TX Statistics
The Ethernet Port TX PM report page displays PMs that measure various peak
transmission rates (in seconds) and average transmission rates (in seconds),
both in bytes and in packets, for each measured time interval.
The page also displays the number of seconds in the interval during which
transmission rates exceeded the configured threshold.
This section includes:
Displaying Ethernet Port TX PMs
Enabling or Disabling Gathering of Port TX PM Statistics per Interface
Setting the Ethernet Port TX Threshold
6.5.2.1 Displaying Ethernet Port TX PMs
To display Ethernet Port TX PMs:
1 Select Ethernet > PM & Statistics > Port TX. The Ethernet Port TX PM
Report page opens.
Figure 133: Ethernet Port TX PM Report Page
2 In the Interface field, select the interface for which you want to display
PMs.
3 In the Interval Type field:
To display reports for the past 24 hours, in 15 minute intervals, select
15 minutes.
To display reports for the past month, in daily intervals, select 24
hours.
Table 42 describes the Ethernet TX port PMs.
