FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 282 of 597
3 In the New RADIUS Client window:
i Select the Enable this RADIUS client check box.
ii Enter a descriptive Friendly name for the device, such as
IP-20X
.
iii Enter the device IP Address.
iv Select RADIUS Standard as the Vendor name.
v In the Shared Secret section, select Manual, and enter a Shared
secret, then enter it again in Confirm shared secret. Note down the
secret because you will need to enter the same value in the Secret field
of the Radius Configuration – Edit page (Figure 209).
Step 3
– Creating a Network Policy
Create a network policy for each of the three groups you created:
Radius_Advanced, Radius_Normal, Radius_Viewer. That is, follow the
instructions in this section, for each of the three groups.
To create a network policy:
1 In the Server Manager, navigate to Roles > Network Policy and Access
Service > NPS (Local) > Policies > Network Policies.
2 Right-click Network Policies, and select New. The New Network Policy
wizard appears.
3 In the specify Network Policy Name and Connection Type, give the policy a
descriptive name, indicating whether it is a policy for the Advanced, the
Normal or the Viewer group.
