FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 341 of 597
Table 71: Daylight Savings Time CLI Parameters
Parameter
Input Type
Permitted Values
Description
start-date-month
Number
1
–
12
The month when Daylight Savings Time
begins.
start-date-day
Number
1
–
31
The date in the month when Daylight
Savings Time begins.
end-date-month
Number
1
–
12
The month when Daylight Savings Time
ends.
end-date-day
Number
1
–
31
The date in the month when Daylight
Savings Time ends.
offset
Number
0
–
23
The required offset, in hours, for Daylight
Savings Time. Only positive offset is
supported.
Examples
The following command configures daylight savings time as starting on May
30 and ending on October 1, with an offset of 20 hours.
root> platform management time-services daylight-savings-time
set start-date-month 5 start-date-day 30 end-date-month 10 end-
date-day 1 offset 20
13.10
Enabling the Interfaces (CLI)
By default:
Ethernet traffic interfaces are disabled and must be manually enabled.
The Ethernet management interface is enabled.
Radio interfaces are enabled.
Note:
IP-20S and IP-20E units have a single radio interface.
To enable or disable an interface, enter the following command in root view:
root> platform if-manager set interface-type <interface-type>
slot <slot> port <port> admin <admin>
To display the status of all the interfaces in the unit, enter the following
command in root view:
root> platform if-manager show interfaces
Table 72: Interface Configuration CLI Parameters
Parameter
Input Type
Permitted Values
Description
interface-type
Variable
ethernet
radio
ethernet
–
an Ethernet traffic
interface.
radio
–
a radio interface.
slot
Number
Ethernet: 1
Radio: 2
The slot on which the interface is
located.
