FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 272 of 597
3 In the User name field, enter a user name for the user. The user name can
be up to 32 characters.
4 In the Profile field, select a User Profile. The User Profile defines the user’s
access levels for functionality groups in the system. See Configuring User
Profiles.
5 In the Password field, enter a password for the user. If Enforce Password
Strength is activated (see Configuring the Password Security Parameters),
the password must meet the following criteria:
Password length must be at least eight characters.
Password must include characters of at least three of the following
character types: lower case letters, upper case letters, digits, and
special characters. For purposes of meeting this requirement, upper
case letters at the beginning of the password and digits at the end of
the password are not counted.
The last five passwords you used cannot be reused.
6 In the Blocked field, you can block or unblock the user. Selecting Yes
blocks the user. You can use this option to block a user temporarily,
without deleting the user from the system. If you set this option to Yes
while the user is logged into the system, the user will be automatically
logged out of the system within 30 seconds.
Note:
Users can also be blocked by the system automatically. You
can unblock the user by selecting No in the Blocked field.
See Configuring the General Access Control Parameters.
7 Optionally, in the Expiration date field, you can configure the user to
remain active only until a defined date. After that date, the user
automatically becomes inactive. To set an expiration date, click the
calendar icon and select a date, or enter a date in the format dd-mm-yyyy.
In addition to the configurable parameters described above, the Access
Control User Accounts page displays the following information for each user:
Login Status – Indicates whether the user is currently logged into the
system.
Last Logout – The date and time the user most recently logged out of the
system.
To edit a user’s account details, select the user and click Edit. You can edit all
of the user account parameters except the User name and password.
To add a user, click Add.
To delete a user, select the user and click Delete.
