Cisco ONS 15454 M6, Installation Manual

Page: 1 / 164

Installing the ONS 15454 M6 Shelf
This chapter explains how to install the ONS 15454 M6 shelf.
Unless otherwise specified, the ECU module refers to the ECU, ECU2, ECU-S, and ECU-60V units. For
details about the various ECU modules, see the
External Connection Units, on page 72 .
Note
• ANSI Rack Installation, on page 2
• ETSI Rack Installation, on page 4
• Air Deflector, on page 6
• Air Plenum, on page 6
• Air Plenum Rack and Cabinet Compatibility, on page 8
• NTP-G344 Install the Air Plenum in ONS 15454 M6 Shelf, on page 9
• Air Flow Performance of ONS 15454 M6, on page 23
• NTP-G252 Install the ONS 15454 M6 Shelf , on page 24
• Front Door, on page 50
• NTP-G258 Install the Standard Door of the ONS 15454 M6 Shelf , on page 53
• NTP-G259 Open and Remove the Standard Door of the ONS 15454 M6 Shelf , on page 57
• NTP-G327 Install the Deep-Front Panel of the ONS 15454 M6 Shelf, on page 62
• NTP-G329 Remove the Deep-Front Panel of the ONS 15454 M6 Shelf , on page 69
• External Connection Units, on page 72
• NTP-G253 Install the ECU or ECU-S Module, on page 79
• NTP-L68 Upgrading to ONS 15454 M6 ECU60-S Module, on page 82
• Power Modules, on page 82
• NTP-G524 Install the Power Modules in the ONS 15454 M6 Shelf , on page 85
• LCD Unit, on page 96
• NTP-G255 Install the LCD Module in the ONS 15454 M6 Shelf, on page 96
• Power and Ground Description, on page 98
• NTP-G256 Install Power and Ground to the ONS 15454 M6 Shelf , on page 100
• Fan-Tray Assembly , on page 117
• NTP-G257 Install the Fan-Tray Assembly in the ONS 15454 M6 Shelf, on page 118
• Cable Routing and Management, on page 120
• NTP-G290 Install the Cable and Fiber Modules, on page 121
Installing the ONS 15454 M6 Shelf
1