USB 3.0 ports (Ports 5 and 11)
2
VOIP/UDC ports (RJ-45 port)
3
EMS port (RJ-45 port)
4
MSM ports
5
Craft terminal connection
6
The ONS 15454 M6 ECU60-S supports IEEE1588v2 PTP, time-of-day (ToD), and pulse-per-second (PPS)
inputs. The IMPROPRMVL alarm is raised in CTC when the ECU60-S is removed from the ONS 15454 M6
shelf.
When ONS 15454 M6 is pre-provisioned, or plugged in without the ECU60-S unit, by default, CTC uses the
ECU module with the 12 USB 2.0 ports.
Note
The fiber shuffle unit or the NCS2K-MF-6RU unit, which can be used to interface 14 single slot passive
optical modules can be connected to the ONS 15454 M6 ECU60-S using the USB 3.0 port.
The MPO-fan-out unit or the NCS2K-MF10-6RU unit, which can be used to interface 10 double slot passive
optical modules can be connected to the ONS 15454 M6 ECU60-S using the USB 3.0 port.
The ONS 15454 M6 ECU60-S is backward-compatible with releases prior to 10.5.2.
The external connections present on the NCS 2006 ECU60-S are:
• 2 USB 3.0 connections
• The USB 3.0 port on the left of the faceplate is detected as A5.
• The USB 3.0 port on the left of the faceplate is detected as B5.
• 8 USB 2.0 connections
• 4 USB 2.0 on the left of the faceplate are detected as A1, A2, A3, A4.
• 4 USB 2.0 ports on the right of the faceplate are detected as B1, B2, B3, B4. In releases prior to
10.5.2, these ports are detected as A5, A6, B1, B2 respectively.
• 2 BITS-OUT connections (2 subminiature version B [SMB] connectors for ETSI and 4 wire-wrap pins
for ANSI)
• 10 MHz IN and OUT and PPS IN and OUT (hardware-ready)
• 2 BITS-IN connections (2 SMB connectors for ETSI and 4 wire-wrap pins for ANSI)
• 6 multishelf connections
• 1 element management system (EMS) connection
• 1 craft terminal connection
• 1 time-of-day (ToD) connection (hardware-ready)
• 2 VoIP or 2 user data channel (UDC) connections, or one each of VoIP and UDC connections
POE functionality is not available for the VOIP ports.
Note
Installing the ONS 15454 M6 Shelf
76
Installing the ONS 15454 M6 Shelf
ECU60-S
