FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 122 of 597
4.7.7
Backing Up the Current Configuration
You can back up the current configuration file to one of the system's three
restore points.
To back up a configuration file:
1 Select Platform > Configuration > Configuration Management. The
Configuration Management page opens (Figure 80).
2 In the File Number field, select the restore point to which you want to
back up the file. If another configuration file is already saved to that
restore point, it will be overwritten by the file you back up.
3 Click Backup. The backup begins. You can view the status of the backup in
the Backup file creation status field. Possible values in the status field
are:
Ready – The default value, which appears when no backup is in
progress.
Generating file – The system is verifying the files to be backed up.
If an error occurs during the backup, an appropriate error message is
displayed in this field.
When the backup is complete, one of the following status indications appears:
Succeeded
Failure
The next time the system is reset, the Backup file creation status field
returns to Ready.
4.7.8
Restoring a Saved Configuration
You can replace the current configuration with any configuration file saved to
one of the system's three restore points by restoring the configuration file
from the restore point. Restoring a saved configuration does not change the
unit’s FIPS mode.
To restore a configuration file:
1 Select Platform > Configuration > Configuration Management. The
Configuration Management page opens (Figure 80).
2 In the File Number field, select the restore point that holds the
configuration you want to restore.
3 Click Restore. The configuration restoration begins. You can view the
status of the restoration in the Configuration restore status field.
Note:
While a configuration restoration is taking place, no user
can make any changes to the configuration. All system
configuration parameters are read-only during the
configuration restoration.
