OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
123
Fig. 143
6.4.1
ADJUSTING THE LOWER LINK ARMS
The automatic connection is fixed and can only be adjusted vertically with the adjustable arm.
To adjust the lower link arms:
•
Remove the safety pin (1) and pull out the bolt (2).
•
Adjust the desired position of the link arm by moving it up and down.
•
When you finish adjusting the position of the arm, insert the bolt back and lock it with a
safety pin.
•
Repeat the procedure for the other link arm.
6.4.2
ADJUSTING THE TOP LINK
The top link is adjusted in the same way as described in the previous paragraph; refer to the
chapter “Adjusting the top link”.
In addition to the standard, mechanically adjustable top link, the user can optionally choose a
hydraulically adjustable top link.
WARNING:
When the lower link arms are adjusted, always make sure that the
bolts are properly inserted and blocked with a safety pin before working.
Summary of Contents for AGT 106
