OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
187
Fig. 222
8.6.3
CLEANING THE RADIATOR
Regularly check that the radiator is clean to ensure adequate ventilation and correct cooling. If
the slots are blocked, the radiator fins will not receive enough air to allow for sufficient
ventilation, which may result in overheating and subsequent damage to engine parts under load.
To clean the radiator, follow the procedure described below.
•
Lift the engine cover.
•
Clean the radiator using compressed air.
•
We recommend that the other radiators are cleaned by following the same procedure as
this is the only ways to ensure a sufficient air flow to the water radiator.
Illustration of all radiators on the tractor.
•
Water cooler or coolant radiator (1)
•
Air radiator (2)
•
Fuel radiator (3)
•
Hydraulic oil radiator (4)
WARNING:
Do not use the compressed air jet too close to the radiator fins to
avoid damaging the fins.
WARNING:
When cleaning the radiator or the grill, always use safety glasses
and safety mask for protection against dust and other particles that may come in
contact with your eyes and respiratory tract.
Summary of Contents for AGT 106
