OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
64
Fig. 59
Fig. 60
4.8.2.3
IGNITION KEY
It is used to activate the electrical system
and start the tractor’s engine. The key can
be turned to the following positions:
P – The parking lamps turn on
. Push the
key into the lock and turn it to the left.
When in this position, the key can be
removed from the lock.
0 – The electrical system is off
; you can
remove the key.
1 – The electrical system is on
, the
dashboard illuminates, all the conditions
for starting the engine are fulfilled,
preheating of glow plugs is activated.
2 – The engine is started
, hold the key in
this position until the engine is started.
When the key is released, it will
automatically return to position 1.
4.8.2.4
MULTIFUNCTION LEVER
It is used to activate the following functions:
1 – Rotating button on the lever in
position 1
, all the lamps are turned
off.
2 – Rotating button on the lever in
position 2
, the parking lamps are
turned on.
3 – Rotating button on the lever in
position 3
, the low beam headlamps
are turned on.
4 – Lever in position 4
, the right
direction indicators are turned on.
5 – Lever in position 5
, the left
direction indicators are turned on.
6 – Lever in position 6
, pressing the
rotary knob activates the horn.
WARNING:
When the key is in the position P, the parking lights turn on. Do not
leave the key in this position for a long time, because you can discharge the
battery and tractor start up, will not be possible!
Summary of Contents for AGT 106
