OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
25
2.12.1
IMPROPER USE OF WEIGHTS
•
Be careful not to overload the tractor with weights installed and do not exceed the
maximum weight.
•
Do not use weights on the tractor unless necessary.
•
Do not use weights that are not compatible with those prescribed by the manufacturer.
•
Do not use weights that are not compatible with the weight of the implement attached and
therefore not suitable for work.
2.13
SAFETY INSTRUCTIONS FOR OPERATING THE TRACTOR DURING
SPRAYING
The operator of the tractor must be familiar with the regulations concerning plant protection
products. For this reason, you must always read the instructions for use on the label of chemical
protection products.
Comply with regulations, safety precautions and instructions:
•
When working, keep the cab windows and doors closed and use respiratory protection,
such as a gas mask or a fresh-air helmet.
•
When preparing chemical substances, wear appropriate clothing. When working, use
protective mask, gloves, boots and protective clothing.
•
Before use, read the operating instructions of the spraying device and become familiar
with all the risks related to the device.
•
After use, clean the spraying device and store it in a suitable area, where it cannot be
accessed by unauthorized persons.
•
Regularly clean the tractor and the spraying device to reduce the risk of direct contact
with chemicals.
•
After spraying is finished (if necessary), clean the tractor and the spraying equipment in a
suitable area to avoid the release of chemicals into the environment.
•
Ensure that your protective equipment and clothing is properly maintained and clean. A
dirty gas mask may cause skin irritation. Replace the filter regularly.
•
Keep the protective equipment in a dry, cool and clean area.
•
Protective equipment which is contaminated with chemicals during work must be cleaned
in accordance with the rules on cleaning dangerous substances.
It is recommended that the tractor cab is hermetically closed during the spraying process and that
the cab allows for a generation of overpressure with fresh air ventilation to prevent the
chemically polluted air from entering the cab.
According to specifications, the tractor is not
equipped with a suitable cab for this purpose or the cab is NOT CERTIFIED, which means
that this tractor is not suitable for this type of work!
2.13.1
IMPROPER USE DURING SPRAYING
•
Do not begin spraying before using personal protective equipment, even if your
tractor is equipped with a protective cab.
•
Do not use protective equipment if worn out; always take care of your protective
equipment.
•
Never store your protective equipment in the same place where chemicals are stored.
•
Store your chemical protection suit separately from other clothes.
•
Do not spray in the presence of other persons in the operating area, otherwise such
persons may be exposed to inhalation of chemical products.
Summary of Contents for AGT 106
