OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
122
Fig. 142
6.4
ADJUSTING THE FRONT HYDRAULIC LIFT MECHANISM (OPTIONAL)
With suitable adjustments, this tractor model allows for the connection of category I implements.
Before connecting an implement for the first time, it is important to check that the weight does
not exceed the maximum permissible axle load on the tractor.
If you believe that the tractor would be too unstable with the implement connected, install
appropriate weights to increase stability.
This adjustment must be performed whenever you change the implement and the attachment
points are arranged differently than on the previous implement.
According to requirements, the front hydraulic lift mechanism can be adjusted in several
different ways, as described below.
1.
Adjusting the lower link arms
2.
Adjusting the top link
Before adjusting the front hydraulic lift mechanism
•
Drive the tractor to the implement to be installed.
•
Lower the lower link arms to the height of connection points on the implement.
•
Stop the tractor when the conditions are safe, if necessary, secure it with safety wedges.
Summary of Contents for AGT 106
