OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
74
Fig. 73
Fig. 74
4.8.5.2
HYDRAULIC SYSTEM CONTROL THROUGH QUICK COUPLINGS
Control lever B - Control lever C
Each control lever directs the oil from the pressure circuit, by means of a control valve in the
control device, through two hydraulic connections or quick couplings for controlling the external
implements equipped with a hydraulic system and a double-acting hydraulic cylinder. It is also
possible to connect external implements equipped with a hydraulic system and a single-acting
hydraulic cylinder; e.g. implements with a hydraulic tilt system, such as tipping trailers etc.
Description of hydraulic system operation by means of quick
couplings connected to a double-acting hydraulic system.
Each control lever has four positions:
•
“Position 0”, neutral position of the lever, the connections
are not supplied with oil, the tractor implement is not
activated.
•
“Position 1”, the oil under pressure is supplied, the tractor
implement is activated.
•
“Position 2”, the oil under pressure is supplied, the tractor
implement is activated and operates in the opposite
direction from position 1 of the lever.
•
“Position 3”, the oil flow under pressure is released, the
tractor implement is activated in the float position.
When the lever is in position 1 and 2, it is blocked inside its guide
and must be moved to position 0 manually in order to stop its
operation.
Move the lever to position 3 along the guide groove in the sheet
metal housing where it will be blocked. To interrupt the operation, the lever must always be
manually moved to position 0.
Description of hydraulic system operation by means of connecting to a single-acting hydraulic
system. Only one connection is used.
•
If the lever is moved to position 1 or 2,
depending on the coupling connection,
the oil under pressure is supplied to the
single-acting cylinder on the connection
and the hydraulic cylinder starts lifting.
When released, the lever will not
automatically return to neutral position
0; this must be done manually. The
hydraulic cylinder remains in the
desired lift position.
IMPORTANT:
Immediately move the control lever from position 3 to position 0,
otherwise the implement may hit the ground or the tractor may be lifted and
become unstable.
Summary of Contents for AGT 106
