OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
61
Fig. 54
Fig. 55
4.8.2.2
USER MENU
Description of functions which can be adjusted by the user.
1.
Date and time setting
Before adjusting this setting, the tractor must be immobilized and safely stopped, with a zero
speed on the gauge.
To adjust the clock:
•
Press the button
and hold for 4 seconds; the time and
date menu is displayed.
•
Adjust the time by using the buttons
and
.
•
Press
to confirm.
•
Adjust the minutes by using the buttons
and
.
•
Press
to confirm.
To adjust the date (continued):
•
Adjust the day by using the buttons
and
.
•
Press
to confirm.
•
Adjust the month by using the buttons
and
.
•
Press
to confirm.
•
Adjust the year by using the buttons
and
.
•
Press
to confirm.
The adjustment is finished. The menu closes and the home screen is displayed.
2.
Setting the forced regeneration of the DPF particulate filter
Before adjusting the regeneration mode setting, the tractor must be immobilized and safely
stopped. Make sure the following conditions are met, otherwise you will not be able to perform
this setting.
•
To enable the forced regeneration setting, the filter clogging level must reach the level 3
or higher.
•
The tractor's engine must be running at idle speed.
•
The driving direction lever (inverter) must be in neutral.
•
The parking brake must be engaged.
•
The PTO drive shaft must be disengaged.
•
The water temperature must be at least 65°C or higher.
Summary of Contents for AGT 106
