OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
124
Fig. 144
6.5
ADJUSTING THE HEIGHT OF THE REAR TOW HOOK
The tow hook is designed for attaching trailed implements and is suitable for single-axle or
double-axle trailers. When performing the attachment for the first time, it is important to check
whether the tow hook on the tractor is suitable for the traction load and the vertical load on the
attachment point of the trailed implement. If you believe that the tractor would be too unstable
with the implement connected, install appropriate weights to increase stability.
The rear tow hook must be adjusted with each attachment of a trailed implement, if the height of
the attachment point differs from the previous implement.
For easier attachment of the trailed implement, you can also adjust the height of the tow hook.
•
Drive the tractor to the implement.
•
Remove the safety pins (1) from all four bolts.
•
Remove the bolts (2).
•
Adjust the desired position of the tow hook. Another person can help you make this
adjustment. The tow hook can also be turned if the attachment point on the implement is
higher.
•
After performing the adjustment, insert the bolts (2) and lock them with the
corresponding safety pins (1).
WARNING:
When the rear tow hook is adjusted, always make sure that the bolts
are properly inserted and blocked with a safety pin before starting to work.
DANGER:
Do not attach a trailed implement if the tow hook is damage.
Summary of Contents for AGT 106
