Agromehanika AGT 106, Operating Instructions Manual

Page: 92 / 245

OPERATING INSTRUCTIONS AGT 1060 Rev.09/2020
91
To be adjusted correctly, the pressure according to the weight of the implement must be 20%
lower than pressure reading on the gauge C. Readjust the pressure with control lever A for lifting
the hydraulic mechanism.
When the pressure adjustment in the hydraulic accumulator is successfully completed, move the
lever B on the bottom valve B to position 2. The pressure in the hydraulic cylinder is “stored”
and always remains the same when you lower the implement to the ground.
To discharge the hydraulic accumulator, move the lever of the bottom valve B to position 1 and
then move the control lever A to position 2 (lowering) and hold the lever until the pressure is no
longer visible on the gauge. Move the lever of the bottom valve B to position 2; the rear
hydraulic lift mechanism operates without the floating hydraulics with support.
If the lever of the bottom valve B is moved to position 0, the rear hydraulic lift mechanism is
blocked and will remain in the previously adjusted position (control lever A for lifting and
lowering is deactivated).
Labels for floating hydraulics with support.
No. Position Code Meaning Description Image (sign)
/
Next to the
lever of the
bottom valve
535052 Important
Control of the
rear hydraulic lift
mechanism and
floating
hydraulics with
support.
/
At the right
side of the
fender, next
to the lever
of the bottom
valve
535030 Danger
Danger of impact;
floating
hydraulics MUST
NOT be under
pressure when not
in use!
WARNING: Before working on the hydraulic system, particularly when
connecting or disconnection implements, the lever B must always be in position B,
the implement must be lowered and the system MUST NOT be under pressure!