OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
196
Fig. 202
8.8.3
CHANGING THE CAB FILTER
•
The cab filter is located at the front of the cab roof. To replace the cab filter, follow the
procedure described below.
•
•
Loosen the screws (A) and remove the cover;
•
Unscrew the screws (B) and remove the filter holder;
•
Remove the old filter (C) and replace it with a new, original filter. Make sure that the
filter is correctly placed back in its housing;
•
Install the holder and tighten it with screws (B);
•
Install the outer cover and tighten it with screws (A).
Fig. 233
Summary of Contents for AGT 106
