Agromehanika AGT 106, Operating Instructions Manual

Page: 58 / 245

OPERATING INSTRUCTIONS AGT 1060 Rev.09/2020
57
Fig. 51
Exhaust gas: This warning lamp turns on
when the exhaust gas temperature is too high.
This can be caused by the DPF filter blockage
and may require filter regeneration.
Orange LED lamp
Glow plugs: This indicator lamp illuminates
before the engine is started or when the ignition
key is in position 1. The indicator lamp is
illuminated until the glow plug reaches the
required temperature to ignite the fuel mixture
(oil) in the engine cylinder. After this, the glow
plug stops heating and the indicator lamp turns
off. When the indicator lamp turns of, you may
start the engine.
Orange LED lamp
Direction indicators: When this indicator
lamp is on, it indicates that left or right
direction indicators are activated. They are
used to indicate direction during driving. This
indicator lamp also flashes when the hazard
warning light switch is pressed, which also
operates when the ignition is off.
Green LED lamp
Position lights: When the indicator lamp is on,
it indicates that position lights for dashboard
illumination are activated. Green LED lamp
Headlamps (low beam): When this indicator
lamp is on, it indicates that the front low-beam
headlamps are activated. Green LED lamp
5. Buttons
The buttons allow the user to adjust the functions on the dashboard.
A) The “UP” button
selects the options in the menu by moving up
the menu.
B) The “MENU” button
allows you to access the menu screen with
fault codes (only when the faults are active) and is also used to
confirm changes or exiting the menu.
C) The “DOWN” button
selects the options in the menu by moving
down the menu.