OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
242
Fig. 255
10
CONVERSIONS OF TRACTOR LOADS
The total weight of the tractor with implements attached
to the front or rear hydraulic system must not exceed the
maximum permissible total weight, the maximum axle
load and the tyre load capacity.
At least 20 % of the total tractor weight must always be
distributed on the front axle.
The following information is required to make the calculation:
-
[kg] unladen weight of the tractor
-
[kg] the proportion of unladen weight of the tractor on the front axle
-
[kg] the proportion of unladen weight of the tractor on the rear axle
-
[kg] total weight of the rear implement / rear weight
-
[kg] total weight of the front implement / front weight
a
-
[mm] distance between the barycentre of the front implement / weight and the front axle
b
-
[mm] wheelbase of the tractor
c
-
[mm] distance between the rear axle and the axle of the rear ball on the lift lever
d
-
[mm] distance between the rear ball axle on the lift lever and the rear implement / weight
Rear implement of a combination of rear and front implement
1 ) Calculation of the minimum required load on the front axle
Front implement
2 ) Calculation of the minimum required load on the rear axle
3 ) Calculation of the actual load on the front axle
(If the weight of the front implement (
) installed on the tractor does not provide the
required load on the front axle (
), the front implement must be ballasted to
achieve the minimum load on the front axle!)
4) Calculation of the actual total weight
(If the weight of the rear implement (
) installed on the tractor does not provide the
required load on the rear axle (
), the rear implement must be ballasted to achieve
the minimum load on the rear axle!)
5 ) Calculation of the actual load on the rear axle
Summary of Contents for AGT 106
