OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
118
Fig. 136
6.3.2
ADJUSTING THE VERTICAL TENSIONERS
The adjustment of vertical tensioners regulates the height of lower link arms. Extending the
tensioners reduces the height to which the lower link arms are lifted and retracting the tensioners
increases the lift height.
According to the requirements of implements installed, you can choose to only adjust the height
on one or both tensioners.
6.3.2.1
STANDARD VERTICAL TENSIONERS
Adjust the tensioners manually by following the procedure below:
•
Remove the safety pin (1) and lift the handle of the tensioner.
•
The tensioner is extended by rotating the handle in the clockwise direction and retracted
by rotating the handle in the opposite direction.
•
After the desired height on the vertical tensioner is adjusted, release the handle and lock it
with a safety pin.
•
You can repeat this procedure on the other side.
WARNING:
After adjusting the vertical tensioner, always make sure that the
safety pin is closed and properly blocks the tensioner handle before working.
Summary of Contents for AGT 106
