Agromehanika AGT 106, Operating Instructions Manual

Page: 33 / 245

OPERATING INSTRUCTIONS AGT 1060 Rev.09/2020
32
DESCRIPTIONS OF TYPE PLATES
A – Type plate with information about the manufacturer and the tractor , installed at the
right side of the platform under the tractor's console (in the driving direction).
The type plate contains the following information:
1. Manufacturer.
2. Tractor category according to speed.
3. EC approval number.
4. Identification number.
5. Maximum permitted gross weight.
6. Maximum permitted weight on the front axle.
7. Maximum permitted weight on the rear axle.
8. Type of trailer (T-1, with a drawbar).
9. Type of trailer (T-2, with a rigid drawbar).
10. Type of trailer (T-3, with a central axle).
11. Maximum permitted trailer weight (B-1, without brakes).
12. Maximum permitted trailer weight (B-2, with an overrun braking system).
13. Maximum permitted trailer weight (B-3, with hydraulic braking system).
14. Maximum permitted trailer weight (B-4, with pneumatic braking system).
B – Type plate on the roll bar (ROPS) , installed on the left side of the roll bar tube.
The type plate contains the following information:
1. Manufacturer.
2. Structure type.
3. OECD approval number.
4. Tractor type.
5. Tractor model.
C – Type plate with engine information , installed on the right engine block.
The type plate contains the following information:
1. Manufacturer.
2. Identification number.
3. Engine version.
4. EC approval number.
5. Maximum no. of engine revolutions.
6. Engine type.
D – Type plate with the identification number of the tractor , installed on the right side, above
the tractor joint.
E – Type plate on the safety cab (ROPS) , installed on the left side of the cab frame.
The type plate contains the following information:
1. Manufacturer.
2. Structure type.
3. OECD approval number.
4. Tractor type.
5. Tractor model.