OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
167
Fig. 193
8.3
ELECTRICAL SYSTEM
Before performing maintenance work on the electrical system, stop the tractor in safe conditions,
turn off the main switch for disconnecting the battery, refer to “Description of the main safety
components”.
8.3.1
CHANGING THE BATTERY
Check the batter charge level or the electrolyte level. if the battery worn out, is replace it with a
new one. If the battery is new, check that its dimensions and capacity are suitable and match or
exceed the original model.
Disconnecting the battery
•
The key must be in position 0, the main battery switch (1) must be switched off;
•
If the tractor was operating, wait until the engine cools down enough;
•
Open the tractor engine cover;
•
Partially loosen the screws (2) on both sides of the hydraulic oil cooler;
•
Remove the hydraulic oil cooler (3) and tilt it to the left as far as the hydraulic hoses
allow;
•
First, disconnect the ground cable from the negative terminal of the battery;
•
Next, disconnect the positive lead along with the fuse box from the positive terminal of
the battery;
•
Unscrew the screw (4) and remove the bracket (5);
•
Remove the battery (6) from its compartment;
•
Do not place any metal objects on the battery during operation.
Summary of Contents for AGT 106
