OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
65
Fig. 61
4.8.2.5
SWITCHES FOR ACTIVATING THE OPERATING FUNCTIONS
These switches are located under the steering wheel and are used to activate the following
functions.
•
Switch in position 0, the function is off (the indicator lamp in the switch is off).
•
Switch in position 1, the function is on (the indicator lamp in the switch is on).
1.
The rear PTO drive shaft,
pressing the switch activates the rear PTO drive shaft, the
indicator lamp in the switch turns on.
2.
Differential lock,
pressing the switch activates the differential lock, the indicator lamp in
the button turns on.
3.
Hazard warning lights,
pressing the switch activates the warning signal; all four
direction indicators start blinking and the warning lamp in the button is flashing. This
function is also enabled when the tractor is turned off, with the ignition key in position 1.
4.
Rotating lamp,
pressing the switch activates the rotating lamp.
5.
Working lamp,
pressing the switch activates the working lamps on the tractor.
IMPORTANT:
For safety reasons, if the operator leaves the driver's seat when
the PTO drive shaft is engaged, the drive shaft will disengage after 7 seconds. The
PTO drive shaft can be re-engaged through external switches on the fenders; the
procedure is described in the following pages!
IMPORTANT:
The switch on the console must be activated in order to use the
additional switch for controlling the working lamps.
Summary of Contents for AGT 106
