OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
106
6
TRACTOR ADJUSTMENTS
The person authorized to adjust the tractor must comply with the basic safety instructions and
take the necessary precautions to ensure the appropriate level of safety in the place of work.
Unless otherwise specified for exceptional cases, all tractor adjustments must be performed with
the engine off.
Stopping the tractor safely
•
The tractor must always be parked on a flat surface. If this is not possible, secure the
tractor by placing additional wedges under the wheels to ensure it is safely positioned.
•
Move all controls to neutral position and activate the parking brake.
•
If a mounted implement is attached to the tractor, lower the hydraulic lift mechanism and
position the implement on the ground.
•
If a trailed implement is attached to the tractor, activate the brake on the implement. If
there are no brakes, place safety wedges under the wheels of the implement.
•
Move the PTO shaft control lever to neutral position.
•
Move all hydraulic system controls to neutral position.
•
Shut down the engine, remove the key and shift into first gear to ensure better safety.
For easier explanation and understanding of all adjustments which can be made to the tractor,
this chapter is divided into different categories.
•
Adjusting the driver’s area
•
Adjusting the lights
•
Adjusting the rear hydraulic lift mechanism
•
Adjusting the front hydraulic lift mechanism
6.1
ADJUSTING THE DRIVER'S AREA
The driver or the operator can adjust the optimal ergonomic position for driving or working with
the tractor by adjusting the seat, the steering wheel and the rear-view mirrors.
6.1.1
ADJUSTING THE DRIVER'S SEAT
A) Adjusting the length of the seat, see
By pushing the lever outwards, the seat can be moved forwards or backwards to adjust it to your
size requirements.
After the adjustment is finished, release the lever, which will automatically be locked in place to
block the seat in position.
B) Adjusting the height of the seat, see
Use the rotary knob to adjust the height of the seat.
•
Rotate the knob to the right (-) to lower the seat to the desired height.
•
Rotate the knob to the left (+) to raise the seat to the desired height.
Summary of Contents for AGT 106
