OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
66
Fig. 62
4.8.2.6
SWITCHES FOR ACTIVATING THE OPERATING FUNCTIONS
These switches are located on the right side of the steering wheel and are used to activate the
following functions.
•
Switch in position 0, the function is off (the indicator lamp in the switch is off).
•
Switch in position 1, the function is on (the indicator lamp in the switch is on).
1.
The front PTO drive shaft (optional equipment),
pressing the switch activates the
front PTO drive shaft, the indicator lamp in the switch turns on.
2.
Unoccupied position (cover),
it provides space for installing an additional switch, as
required by the user.
IMPORTANT:
For safety reasons, if the operator leaves the driver's seat when
the PTO drive shaft is engaged, the drive shaft will disengage after 7 seconds. The
PTO drive shaft can be re-engaged through external switches on the fenders; the
procedure is described in the following pages!
IMPORTANT: The front PTO drive shaft CANNOT be used with the
current engine version, not even as optional equipment!
Summary of Contents for AGT 106
