OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
176
Fig. 206
Fig. 207
8.3.2.6
INTERIOR LAMP (TRACTOR VERSION WITH A CAB)
The light bulb type for the interior lamp is 12V 5W (single filament). To replace the light bulb in
the lamp, perform the procedure described below.
•
Remove the cover on the lamp with a flat screwdriver.
•
Remove the old light bulb and replace it with a new one.
•
Install the cover back onto the lamp.
8.3.2.7
ROTATING LAMP (OPTIONAL)
The light bulb type for the rotating lamp is H1 12V 55W. To replace the light bulb in the lamp,
perform the procedure described below.
•
Unscrew the screw (1) on the holder and remove the lamp.
•
Unscrew the lamp cover by rotating it to the left (anti-clockwise direction).
•
Replace the light bulb.
•
Screw the cover back on by turning it to the right (clockwise direction).
•
Install the rotating lamp back on its holder and tighten the screw (1).
Summary of Contents for AGT 106
