OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
141
Fig. 163
7.7
UNIVERSAL JOINT
The universal joint IS NOT included with the tractor and is a part of the implement.
7.7.1
CONNECTING THE UNIVERSAL JOINT
Before connecting the universal joint, always stop the tractor in safe conditions and shut off the
engine. When the universal joint is installed on the tractor it can be rotated manually, but ONLY
when the engine is turned off and the PTO drive shaft speed selection lever is in neutral position;
refer to the chapter “Operating controls – PTO drive shaft”.
To connect the universal joint to the tractor and the implement (mounted or trailed), follow the
procedure below.
•
Unscrew the safety guard on the PTO drive shaft (1).
•
Move the PTO speed selection lever to neutral position.
•
Check the condition of the universal joint and the PTO shafts on the tractor and the
implement for damages.
•
Install the universal joint (2) on the PTO drive shaft (3) on the tractor.
•
Check that the safety pins on the universal joint are properly locked. Push and pull the
joint forwards and backwards until the safety pins on both sides of the drive shafts are
locked.
•
Make sure that protective devices are in place and cover all the rotating parts.
•
Secure the protective devices with a chain to prevent their rotation.
WARNING: Always attach the universal joint to the PTO drive shaft on the
implement first before attaching it to the PTO drive shaft on the tractor!
Summary of Contents for AGT 106
