![Agromehanika AGT 106 Operating Instructions Manual Download Page 24](http://html1.mh-extra.com/html/agromehanika/agt-106/agt-106_operating-instructions-manual_2870068024.webp)
OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
23
Fig. 27
Fig. 28
•
Do not heat the painted parts of the tractor as
heating generates toxic gases with can damage
your health. If any painted parts of the tractor
must be repaired by welding, soldering or
heating, you must first remove the paint by
sanding (Fig. 27).
•
Regularly check that the wheel nuts are properly
tightened. Use the correct tightening torque. The
table with tightening torques is provided in the
Maintenance
chapter
of
the
operating
instructions.
•
Always remove the tyre before repairing a
damaged rim. If you are not suitably equipped to
perform this operation, leave it to a qualified person.
•
When welding the rim and the flange (due to damage!), remove the tyre from the rim
because the air pressure would increase during welding and the tyre could blow up.
•
Check the coolant level regularly.
•
Before inspecting or adding the coolant, shut down the engine and allow it to cool down.
When the engine is hot, the coolant in the tank is under pressure and could cause burns
when opening the cover.
•
Before making any adjustment or repairs on the electrical system or before any welding
operations on the tractor, disconnect the battery terminals (negative cable
−
).
•
Use caution when handling the battery and take care to connect the battery terminals to
the tractor correctly.
•
Battery acid is toxic and corrosive, which is why it may destroy your clothes, burn your
skin or cause blindness in case of eye contact.
•
Operations must always be performed as recommended and the battery must be charged
in a well-ventilated area; when handling the battery, use safety glasses and rubber gloves
and do not inhale toxic gases when adding the electrolyte.
•
If you spill the electrolyte on your skin, immediately rinse with
water and remove the contaminated clothing. Sprinkle the affected
area with baking soda to neutralize the acid. If the electrolyte
contacts your eyes, flush with water for 10–15 minutes and
immediately seek medical attention.
•
In case of electrolyte ingestion, immediately drink plenty of water
and magnesium milk, scrambled eggs or vegetable oil and seek
immediate medical attention (Fig. 28).
•
In case of suspected poisoning (symptoms: sweating, dizziness,
depression, headache, nausea):
-
stop working immediately;
-
remove any wet clothing;
-
stay calm;
-
lie down on your side;
-
immediately call a doctor.
Summary of Contents for AGT 106
