OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
127
Fig. 148
After the drive is finished, immediately raise the roll bar in the upright position.
To raise the roll bar, follow the procedure below.
•
Before raising the roll bar, make sure that the operating area is safe to avoid any injuries
when handling the roll bar.
•
Remove the safety pin (1) and pull out the bolt (2).
•
Slowly raise the roll bar to the vertical position. To make this task easier, move your grip
and your body to the left and right when raising the roll bar.
•
When the work is finished, make sure that the roll bar is moved to the appropriate
position.
•
Insert the bolt (2) and the safety pin (1) back and block the roll bar in place.
DANGER:
Do not use the safety belt when driving with the roll bar lowered.
WARNING:
If the roll bar is damaged or improperly installed, do not use the
tractor for performing any work!
Summary of Contents for AGT 106
