OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
82
Fig. 87
4.9.3
ADDITIONAL HYDRAULIC CONTROLS
Additional control devices are installed on the left side of the tractor. Each lever is used to
control a particular function through a control valve installed in the control device. Description
of control levers and their arrangement according to function is available on the following pages.
•
Additional control device on the standard hydraulic system.
•
Additional control device on the hydraulic system with a front hydraulic lift mechanism.
Diagram of control levers on the tractor.
4.9.3.1
ADDITIONAL CONTROL DEVICE ON THE STANDARD HYDRAULIC SYSTEM
Control levers A, B and C
, see Fig. 87, are fitted as standard equipment and their functions are
described in the chapter “Hydraulic controls”.
The control lever D
is used to activate the
yellow hydraulic connection C
or the quick
coupling for controlling external implements, which are equipped with a hydraulic system with a
single-acting cylinder.
The control lever has three positions:
•
“Position 0”, neutral position of the lever, there is no oil supply to the connection, the
tractor implement is not activated.
•
“Position 1”, the oil under pressure is supplied, the tractor implement is activated.
•
“Position 2”, the oil flow under pressure is released, the tractor implement is activated. If
the control lever remains in position 2 when the lift mechanism is completely lowered,
the operator can use the float position option which means that the implement attached to
the tractor will automatically adapt to the ground.
•
When in position 1, the lever will return to position 0. If in position 2, the lever must be
moved manually.
Summary of Contents for AGT 106
