OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
47
1.
Front roll bar (ROPS)
The roll bar protects the driver in case of an accident or a tractor rollover. The front roll bar is
designed so it can be moved to horizontal position. This is only allowed when it cannot be
avoided due to circumstances during work, on even ground where there is no risk of rollover and
for short distances.
When the roll bar is lowered, the driver may not fasten the safety belt, which is why the driver
must use extra caution during driving because there are no safety elements to protect him in case
of a rollover. In any case, the driver or the operator must never drive the tractor on public roads
when the roll bar is lowered.
2.
Rear roll bar (ROPS)
The roll bar protects the driver in case of an accident or a tractor rollover.
3.
Cab (ROPS)
The cab protects the driver in case of an accident or a tractor rollover.
4.
PTO drive shaft protective cover
The protective cover prevents the operator from coming into contact with the rotating drive shaft.
The protective cover is made in accordance with the Commission Delegated Regulation (EU)
No. 1322/2014.
5.
PTO drive shaft guard
It provides protection against dirt and prevents the operator from coming into contact with the
rotating drive shaft.
6.
Main ON/OFF switch for switching off the battery
It immediately switches off the electrical system, regardless of the current state of the tractor. To
switch on and off, see the figure Fig. 45.
7.
Dashboard
It shows the current state of the tractor. The indicator lamps are used to alert you when there is a
malfunction or when a control has been activated.
WARNING:
The driver MUST NOT use the safety belt when the roll bar is
lowered!
WARNING:
The tractor must not be used if the roll bar is not properly installed,
if the roll bar is damaged or modified in any way.
In this case, replace the roll bar with a new one.
IMPORTANT:
The roll bars and the cab (ROPS) have been tested to the
standard OECD and provide an appropriate level of protection for the driver in the
event of a rollover.
WARNING:
When the indicator lamps on the dashboard come on, stop working,
safely stop the tractor, remedy the problem or consult technical service.
Summary of Contents for AGT 106
