OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
48
8.
Front PTO drive shaft switch (optional equipment)
For engaging and disengaging the front drive shaft.
•
When the switch is on, it prevents the engine from being started.
9.
Switch on the driving direction selector lever (neutral gear)
The indicator lamp “N” on the dashboard indicated the state of the inverter. When the lever is
not in neutral position (forward or reverse driving), the switch prevents the engine from being
started.
10.
Parking brake switch
It detects when the parking brake is switched on; indicator lamp “P” on the dashboard.
11.
Rear PTO drive shaft switch
For engaging and disengaging the rear drive shaft.
•
When the switch is on, it prevents the engine from being started.
12.
Clutch switch
It detects the position of the clutch; when the pedal is not depressed, the switch prevents the
tractor engine from starting.
13.
Safety belt
It is classified as a two-point safety belt because it is fastened at two points on the seat and is
strapped across the driver’s waist.
Initially, the safety belt is in adjustment position, which means that its length must be adjusted
before use according to the operator's body.
14.
Seat mechanism switch
When driving, the seat mechanism must always be appropriately locked with a pin. When the
seat mechanism is raised, the switch prevents the engine from starting or immediately stops the
engine when the mechanism is engaged during driving.
15.
Seat switch
It detects the presence of the driver.
•
The switch prevents the engine from starting when the driver is not properly positioned
on the seat.
•
To alert to potential danger, the switch activates the horn if the driver leaves the seat
when the tractor is running and fails to activate the parking brake.
•
When the driver leaves the seat while the engine is running, the switch deactivates the
operation of the drive shaft after 7 seconds. It is activated through external PTO switches.
WARNING:
Always use the safety belt when driving the tractor, the only
exception is when the roll bar is lowered!
Summary of Contents for AGT 106
