OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
15
Fig. 15
Fig. 13
Fig. 14
2.5
SAFETY INSTRUCTIONS DURING TRACTOR OPERATION
When working with the tractor, always comply
with the rules and road traffic regulations when
driving on the road and strictly follow the
safety instructions.
Before commencing work, make sure that other
persons, especially elderly and children, are
outside of the tractor's danger area, especially
when it is running or moving. If necessary,
stop the tractor and wait until such persons
move to a safe distance before continuing work
(see the figure with dangerous areas
.
When working with the tractor, make sure the
following conditions have been fulfilled:
•
Before operating the tractor, always check the condition
of the safety belt and immediately replace it if damaged
or worn.
•
Always use a safety belt that ensures safe working
conditions and retains the driver in its position in case of
a tractor roll-over (Fig. 14);
•
As an exception. the safety belt is NOT required for
short distances on a tractor without a cab, with the roll bar
lowered, when there is no risk of roll-over;
•
When driving or operating the tractor, the roll bar (ROPS) must
always be moved in the vertical position (Fig. 15);
•
The roll bar only provides appropriate level of protection if its
structure is intact.
•
If the safety roll bar is lowered, the tractor must be positioned
on a solid, level ground without slopes or obstacles.
•
Replace the roll bar
if the roll bar or its structure is damaged,
in case of a tractor roll-over or when running into an obstacle while driving.
•
The safety cab (ROPS) installed on the tractor meets the safety requirements of European
standards.
•
If the tractor rolls over, the safety cab will only protect or reduce the risk of driver
injuries if the driver follows all safety precautions and uses the safety belt.
•
When optional equipment is installed in the safety cab, consult the qualified persons who
will provide you the necessary information.
•
Replace the safety cab
if the safety cab or its structure was damaged during a tractor
rollover or if you crashed into an obstacle while driving!
•
The manual throttle should only be used for starting (pre-heating) the engine or when
operating tractor implements, which require constant rpm.
•
Any unauthorized persons riding on a part of the tractor which was not designed for
carrying people may be injured or have an accident (falling off the tractor), or distract the
driver during operation, or change the tractor's barycentre, or obstruct the driver's field of
view, thereby causing the working conditions on the tractor to become unreliable.
•
You and the persons around you must always use caution when standing near the rotating
parts of the tractor.
•
All moving parts (shafts, couplers, cylinders, belts etc.) must be equipped with a
protection to prevent potential entanglement of clothes or body parts.
Summary of Contents for AGT 106
