OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
142
Fig. 164
Fig. 165
Fig. 166
Fig. 167
If the universal joint is too long and needs to be
shortened, disassemble the universal joint and
separately install each part to the PTO shaft of the
tractor and the implement.
Measure the length by which the
universal joint must be shortened
and mark the cutting point. Use an
appropriate tool to equally shorten
both parts of the joint and remember
to grind off the edges after cutting.
Install the profiles and join both parts of the
universal joint
.
WARNING:
Do not use the universal joints if protective devices are not in place!
DANGER:
If the universal joint is connected to the tractor first and it accidentally
engages, it may start to wobble and cause serious injuries or death!
Summary of Contents for AGT 106
