OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
89
Fig. 95
When the control lever is in position 3, the operator can use the float position option,
which means that the implement attached to the tractor will automatically adapt to the
ground. This only applies if the three-way valve is in position 1, see description below.
With this version of hydraulic lift mechanism, it is possible to convert the double-acting
hydraulic cylinder into a single-acting cylinder by means of an additional three-way valve
installed on the right side, next to the driver's seat.
•
To convert to one-way operation of hydraulic cylinder, move the valve lever to position
1.
•
To convert to two-way operation of hydraulic cylinder, move the valve lever to position
2.
Label on the three-way valve
No. Position
Code
Meaning
Description
Image (sign)
/
Next to the
lever of the
three-way
valve
535051
Important
It is possible to
switch between one-
way and two-way
operation of
hydraulic lift
mechanism.
WARNING:
Never move the lever of the control device and leave it fixed in
position 3 when the three-way valve lever is in position 2. If an implement is
attached, it may impact with the ground and compromise the stability of the
tractor, which may lead to injuries and property damage.
Summary of Contents for AGT 106
