OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
119
Fig. 137
Fig. 138
6.3.2.2
VERTICAL HYDRAULIC TENSIONER
The vertical hydraulic tensioner is adjusted with a control lever on the control device, which is
used for controlling the double-acting hydraulic system.
•
The tensioner is retracted by moving the lever upwards in position 1 and extended by
moving the lever downwards in position 2.
•
In position 3, the lever is not functional and the vertical tensioner is not moving.
•
When you adjust the desired height of the vertical tensioner, move the control lever to
position 0 to block the tensioner.
6.3.3
ADJUSTING THE TOP LINK
Before the implement is attached to the tractor, the
top link adjustment must be performed. Adjusting
the length of the top link bar regulates the angle of
the implement in relation to the ground level.
If the top link is extended, the angle of the
implement decreases. If the top link is retracted, the
angle increases.
In addition to the standard, mechanically adjustable
top link, the user can optionally choose a
hydraulically adjustable top link.
Summary of Contents for AGT 106
