OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
67
Fig. 63
4.8.3
DRIVING CONTROLS
All driving controls required by the user for driving are described below.
1.
Foot brake,
when driving, it is used to reduce the speed or stop the tractor.
2.
Parking brake,
it is used to block the tractor in place; comply with the rule “stop the
tractor when conditions are safe”.
3.
Clutch,
it is used when moving the gear shift levers to select the tractor's speed.
4.
Accelerator pedal,
for adjusting the tractor's driving speed by foot.
5.
Accelerator lever,
for manual adjustment of the constant speed of engine revolutions.
6.
Control levers,
for selecting the speed groups, driving direction and gearbox gears.
7.
Steering wheel lever,
for adjusting the inclination of the steering wheel.
4.8.3.1
FOOT BRAKE
Each drive shaft in the rear part of the transmission assembly has four hydraulic disc brakes in an
oil bath, which can be activated with two independent brake pedals, through a separate hydraulic
braking system.
1.
Brake pedal,
for braking the rear left wheel.
2.
Brake pedal,
for braking the rear right wheel.
3.
Safety latch,
for connecting the two pedals. When the safety latch is locked, the tractor
braking capacity is distributed to all four wheels. When the pedals are disconnected, they
enable independent braking of the rear left wheel or the rear right wheel.
Summary of Contents for AGT 106
