OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
73
Fig. 72
Below is the description of functions attributed to control levers for the standard hydraulic
system, see Fig. 71:
A.
Lever
, for controlling the front hydraulic lift mechanism.
B.
Lever
, for controlling the hydraulic system through a quick coupling.
C.
Lever
, for controlling the hydraulic system through a quick coupling or controlling the
rear hydraulic lift mechanism by means of double-acting hydraulic cylinders, which can
be installed as optional equipment.
D.
Rotary knob
, for damping the lowering of the rear hydraulic lift mechanism.
4.8.5.1
THE REAR HYDRAULIC LIFT MECHANISM CONTROL
The control lever A
(see Fig. 71) directs
the oil from the pressure circuit, which is
directly supplied to both single-acting
hydraulic cylinders at the same time by
means of a control valve in the control
device, to control the rear hydraulic
mechanism.
The control lever has three positions:
•
“Position 0”, neutral position of the lever, the lift mechanism remains in position.
•
“Position 1”, the oil under pressure is supplied, the rear hydraulic mechanism is raised.
When the lever on the control device is released, it returns to neutral position 0 and the
rear hydraulic mechanism remains in the raised position.
•
“Position 2”, the oil is discharged, the rear hydraulic mechanism is lowered. As the lever
is blocked inside its guide, it will remain in position 2, which is why it must always be
manually moved to position 0 in order to stop the lowering of the lift mechanism.
If the control lever remains in position 2 when the lift mechanism is completely lowered,
the operator can use the float position option which means that the implement attached to
the tractor will automatically adapt to the ground.
Rotary knob D
(see Fig. 71), use the knob to adjust the oil flow rate, which is supplied to the
rear hydraulic lift mechanism. It dampens the lowering movement:
•
when the knob is rotated to the right (clockwise direction) the oil flow is closed;
•
when the knob is rotated to the left (anti-clockwise direction) the oil flow is opened.
This function is only suitable when using heavy implements, to prevent sudden lowering and the
resulting tractor instability.
WARNING:
If a heavier implement is used, remember that the oil permeability
through the control can be 8 cm³/min. When transporting heavier loads, the rotary
knob D must be fully closed!
IMPORTANT:
If the rotary knob for damping is closed all the way, the hydraulic
lift mechanism is blocked and cannot be lowered, even with the control lever in
position 2. The mechanism can still be lifted by the user.
Summary of Contents for AGT 106
