Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 790 / 813

Rear Panel Connectors R&S
®
ZVA/ZVB/ZVT
1145.1084.12 8.18 E-3
RSDLLibonl
This function switches the device to 'online' or 'offline' mode. When it is switched to ‘offline’ mode, the
interface is released and the device handle becomes invalid. By calling RSDLLibfind again, the
communication is set up again.
VB format: Function RSDLLibonl (ByVal ud%, ByVal v%, ibsta%, iberr%, ibcntl&) As Integer
C format: short WINAPI RSDLLibonl( short ud, short v, short far *ibsta, short far *iberr,
unsigned long far *ibcntl)
C format: short RSDLLibonl( short ud, short v, short *ibsta, short *iberr, unsigned long *ibcntl)
Parameter:
ud
Device handle
v
Device state
0 - local
1 - remote
Example: RSDLLibonl(ud, 0, ibsta, iberr, ibcntl)
RSDLLTestSRQ
This function checks the status of the SRQ bit.
VB format: Function RSDLLTestSrq (ByVal ud%, Result%, ibsta%, iberr%, ibcntl&) As Integer
C format: short WINAPI RSDLLTestSrq( short ud, short far *result, short far *ibsta, short far
*iberr, unsigned long far *ibcntl)
C format (Unix): short RSDLLTestSrq( short ud, short *result, short *ibsta, short *iberr, unsigned long
*ibcntl)
Parameter:
ud
Device handle
result
Reference to an integer value in which the library
returns the status of the SRQ bit.
0 - no SRQ
1 - SRQ active, device requests service
Example: RSDLLTestSrq (ud, result%, ibsta, iberr, ibcntl)
This function corresponds to the function
RSDLLWaitSrq
. The only difference is that
RSDLLTestSRQ
immediately returns the current status of the SRQ bit, whereas
RSDLLWaitSrq
waits for an SRQ to
occur.
RSDLLWaitSrq
This function waits until the device triggers an SRQ with the handle
ud
.
VB format: Function RSDLLWaitSrq (ByVal ud%, Result%, ibsta%, iberr%, ibcntl&) As Integer
C format: short WINAPI RSDLLWaitSrq( short ud, short far *result, short far *ibsta, short far
*iberr, unsigned long far *ibcntl)
C format (Unix): short RSDLLWaitSrq( short ud, short *result, short *ibsta, short *iberr, unsigned long
*ibcntl)
Parameter:
ud
Device handle