Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 713 / 813

R&S
®
ZVA/ZVB/ZVT SENSe
1145.1084.12 6.251 E-6
[SENSe<Ch>:]SEGMent<Seg>:OVERlap <Boolean>
Queries whether the analyzer supports overlapping sweep segments.
<Ch> Channel number 1.
<Seg> Sweep segment number.
<Boolean> ON | OFF: No effect.
*RST value OFF. If used as a query, the command returns the information that
overlapping sweep segments are not supported
(OFF) .
SCPI, Command
Types Device-specific, command (no effect) or query
[SENSe<Ch>:]SEGMent<Seg>:POWer[:LEVel] <numeric_value>
Defines the Power of the internal signal source in sweep segment no. <Seg>. At the same time, the
command activates separate power control in all sweep segments
(
[SENSe<Ch>:]SEGMent<Seg>:POWer[:Level]:CONTrol ON
).
<Ch> Channel number 1.
<Seg> Sweep segment number.
<numeric_value> Internal source power.
Range [def. unit] –40 dBm to +10 dBm. The exact range depends on the analyzer
model; refer to the data sheet [dBm].