Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 590 / 813

CALCulate R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.128 E-6
CALCulate<Ch>:TRANsform:VNETworks:SENDed:EMBedding<Ph_pt>:PARamet
ers:L<no> CSL | LSC | LSL | SLC | SCL | SLL,<numeric_value>
Specifies the inductance values L1, L2, L3 in the different circuit models for single ended port
embedding.
<Ch> Channel number.
<Ph_pt> Physical port number
<no> Number of inductance in circuit model. If unspecified the numeric
suffix is set to 1.
Range [def. unit] 1 to 3 [–] The number of inductances depends on the selected
circuit model.
Parameters Possible circuit models (character data); see circuit models.
*RST value – (see command type description below)
<numeric_value> Inductance L<no> for the specified circuit model.
Range [def. unit] –1H to 1 H [H]. The increment is 1 pH (10
–12
H).
*RST value 1 nH (10
–9
H)
SCPI, Command
Types Device-specific, command or query. In the query form, the
<numeric_value> parameter must be omitted. The command
returns the inductance value for the specified circuit model.
Example:
*RST; CALC:TRAN:VNET:SEND:EMB:PAR:L1? SLL
Query the default inductance L1 for the Shunt L, serial L circuit
model. The response is 1E-009 (1 nH).
CALC:TRAN:VNET:SEND:EMB:PAR:L1 SLL, 2.2E-9
Increase the inductance to 2.2 nH.
CALCulate<Ch>:TRANsform:VNETworks:SENDed:EMBedding<Ph_pt>:PARamet
ers:R<no> CSL | LSC | CSC | LSL | SLC | SCL | SCC | SLL,<numeric_value>
Specifies the resistance values R1, R2, R3 in the different circuit models for single ended port
embedding.
<Ch> Channel number.
<Ph_pt> Physical port number
<no> Number of resistance in circuit model. If unspecified the numeric
suffix is set to 1.
Range [def. unit] 1 to 3 [–] The number of resistances depends on the selected
circuit model.
Parameters Possible circuit models (character data); see circuit models.
*RST value – (see command type description below)
<numeric_value> Resistance R<no> for the specified circuit model.
Range [def. unit]
–10 M
Ω
to 10 M
Ω
[
Ω
]. The increment is 1 m
Ω
(10
–3
Ω
).
*RST value
0
Ω
for all resistances connected in series with an inductance
10 M
Ω
for all resistances connected in parallel with a capacitance
SCPI, Command Device-specific, command or query. In the query form, the