Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 591 / 813

R&S
®
ZVA/ZVB/ZVT CALCulate
1145.1084.12 6.129 E-6
Types <numeric_value> parameter must be omitted. The command
returns the resistance value for the specified circuit model.
Example:
*RST; CALC:TRAN:VNET:SEND:EMB:PAR:R1? CSL; R2? CSL
Query the default resistances for the Serial C, shunt L circuit
model. The response is 10000000; 0.
CALC:TRAN:VNET:SEND:EMB:PAR:R2 CSL, 2.2E+3
Increase the resistance R2 to 2.2 k
Ω
.
CALCulate<Ch>:TRANsform:VNETworks:SENDed:EMBedding<Ph_pt>[:STATe]
<Boolean>
Enables or disables the embedding function for single ended ports. It is allowed to change the circuit
model and its parameters while embedding is enabled.
<Ch> Channel number.
<Ph_pt> Physical port number
<Boolean> ON – Embedding active
OFF – Embedding inactive
*RST value OFF [–]
SCPI, Command
Types
Device-specific, command or query
Example:
CALC:TRAN:VNET:SEND:EMB:TND CSL
Select the Serial C, shunt L circuit model for embedding.
CALC:TRAN:VNET:SEND:EMB:PAR:R2 CSL, 2.2E+3;
CALC:TRAN:VNET:SEND:EMB ON
Increase the resistance R2 for the Serial C, shunt L circuit model to
2.2 k
Ω
and enable embedding.
CALCulate<Ch>:TRANsform:VNETworks:SENDed:EMBedding<Ph_pt>:TNDefinit
ion FIMPort | CSL | LSC | CSC | LSL | SLC | SCL | SCC | SLL
Selects the circuit model for single ended port embedding.
<Ch> Channel number.
<Ph_pt> Physical port number
Parameters Possible circuit models (character data); see circuit models.
*RST value CSL
SCPI, Command
Types Device-specific, command or query.
Example:
See
CALCulate<Ch>:TRANsform:VNETworks:SENDed:EMBedding[:STATe]