Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 608 / 813

DISPlay... R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.146 E-6
*RST value *RST does not affect the color settings; see also description of the
Preset command.
SCPI,
Command
Types
Device-specific, command or query
Example:
See DISPlay:CMAP<Element>:RGB.
DISPlay:CMAP<Element>:RGB <red>, <green>, <blue> [,<trace_style>,
<trace_width>]
Defines the color of all display elements based on the Red/Green/Blue color model.
<Element>
Number of the display element. The display elements corresponding
to the numbers 1 to 28 are listed below.
<red>
<green>
<blue> Red, green, and blue content of the defined color.
Range [def. unit] 0 (zero intensity, corresponding to a 0 in the 24-bit color model) to 1
(full intensity, corresponding to 255 in the 24-bit color model) [–]
<trace_style> Optional trace style, only for traces (<Element> > 12): One of the
string parameters SOLid | DASHed | DOTTed | DDOTted |
DDDotted.
<trace_width> Optional trace width, only for traces (<Element> > 12).
Range [def. unit] 1 to 20 [–]
*RST values *RST does not affect the color settings; see also description of the
Preset command.
SCPI,
Command
Types Confirmed (with device-specific numeric suffix and parameters),
command or query. The query returns three values between 0 and
one, separated by commas, corresponding to the red, green, and
blue color content.
Example:
*RST; DISP:CMAP:MARK ON; CALC:MARK ON
Create diagram area no. 1 (with default trace showing the S-
parameter S
21
) and a marker Mkr 1 .
CALC:PAR:SDEF 'TRC2', 'S11'; DISP:WIND:TRAC2:FEED 'TRC2'
Create a new trace named TRC2 and display the trace in diagram
area no. 1.
CALC:PAR:SEL 'TRC2'; CALC:MARK2 ON
Select the new trace as the active trace and assign a marker Mkr 2
to the trace. Both markers are displayed with the same color.
DISP:CMAP13:RGB 1,0,0; DISP:CMAP14:RGB 0,1,0
Color the first trace red, the second trace green.
DISP:CMAP6:RGB?
Query the marker color. The marker color depends on the settings
made in previous sessions; it is not reset. A possible response is
0,0,0 for black markers.
DISP:CMAP:MARK OFF