Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 245 / 813

R&S
®
ZVA/ZVB/ZVT Trace Menu
1145.1084.12 4.83 E-6
•
Freq Re(S11) Im(S11) Re(S21) Im(S21) Re(S12) Im(S12) Re(S22) Im(S22)
•
(all values arranged in 1 line)
•
3-port files (*.s3p)
•
Freq Re(S11) Im(S11) Re(S12) Im(S12) Re(S13) Im(S13)
•
Re(S21) Im(S21) Re(S22) Im(S22) Re(S23) Im(S23)
•
Re(S31) Im(S31) Re(S32) Im(S32) Re(S33) Im(S33)
•
(values arranged in 3 lines)
•
4-port files (*.s4p)
•
Freq Re(S11) Im(S11) Re(S12) Im(S12) Re(S13) Im(S13) Re(S14) Im(S14)
•
Re(S21) Im(S21) Re(S22) Im(S22) Re(S23) Im(S23) Re(S24) Im(S24)
•
Re(S31) Im(S31) Re(S32) Im(S32) Re(S33) Im(S33) Re(S34) Im(S34)
•
Re(S41) Im(S41) Re(S42) Im(S42) Re(S43) Im(S43) Re(S44) Im(S44)
•
(values arranged in 4 lines)
The stimulus frequencies are arranged in ascending order. If a lin. Mag-Phase (MA) or dB Mag-Phase
(DB) data format is selected the real and imaginary S-parameter values Re(S
ij
), Im(S
ij
) are replaced by
lin Mag(S
ij
), phase(S
ij
) or dB Mag(S
ij
), phase(S
ij
), respectively.
ASCII (*.csv) files
An ASCII file contains a header and the actual trace data:
freq;reTrc1_S21;imTrc1_S21;reMem2[Trc1]_S21;imMem2[Trc1]_S21;
300000.000000;0.000000;0.000000;0.000000;0.000000;
40499497.487437;0.000000;0.000000;0.000000;0.000000;
80698994.974874;0.494927;-0.065174;0.500833;-0.074866;
120898492.462312;0.497959;-0.111724;0.488029;-0.107375;
...
The header consists of the following data elements:
<Stimulus> stimulus variable: freq for Frequency sweep, power for Power sweep, time for Time
sweep, trigger for CW Mode sweep.
<reTrace1> first response value of first trace: re<Trace_Name>, mag<Trace_Name> or
db<Trace_Name> for output format Re/Im, lin. Mag-Phase or dB Mag-Phase, respectively. The data
format for export files can be selected in the Export Data dialog.
<imTrace1>
<reTrace2>
<imTrace2>...
second response value of second trace. first response value of second trace.
HZ / KHZ / MHZ / GHZ allowed for imported files. The analyzer alway uses HZ for exported
data.
second response value of first trace: im<Trace_Name> for output format Re/Im,
ang<Trace_Name> for output formats lin. Mag-Phase or dB Mag-Phase. The data format for export
files can be selected in the Export Data dialog.
The trace data is arranged as described in the header. Different values are separated by semicolons. A
semicolon is also inserted before the end of each line.
The stimulus values are arranged in ascending order.