Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 615 / 813

R&S
®
ZVA/ZVB/ZVT DISPlay...
1145.1084.12 6.153 E-6
<Phase> Multiplied phase factor, optional for setting command but returned
by query
Range [def. unit] –3.4*10
38
deg to +3.4*10
38
deg [deg]
*RST value 0 deg
<Real>,
<Imaginary> Real and imaginary part of added complex constant, optional for
setting command but returned by query
Range [def. unit] –3.4*10
38
to +3.4*10
38
[–]
*RST value 0.
SCPI, Command
Types
Device-specific, with query.
Example:
*RST; :DISP:WIND:TRAC:X:OFFS 1MHZ; :DISP:WIND:TRAC:Y:OFFS 10
Create the default trace and shift it horizontally by 1 MHz, vertically
by 10 dB.
DISP:WIND:TRAC:Y:OFFS?
Query all response offset values. The response is 10,0,0,0.
DISPlay:WINDow<Wnd>:TRACe<WndTr>:Y[:SCALe]:AUTO ONCE
Displays the entire trace <WndTr> in the diagram area, leaving an appropriate display margin.
<Wnd> Number of an existing diagram area (defined by means of
DISPlay:WINDow<Wnd>:STATe ON
).
<WndTr> Existing trace number, assigned by means of
DISPlay:WINDow<Wnd>:TRACe<WndTr>:FEED
.
ONCE Activate the autoscale function.
*RST value –
SCPI,
Command
Types Confirmed, no query.
Example:
*RST; DISP:WIND:TRAC:Y:PDIV?; RLEV?
Query the value between two grid graticules and the reference value
for the default trace. The response is
10;0.
DISP:WIND:TRAC:Y:AUTO ONCE; PDIV?; RLEV?
Autoscale the default trace and query the scaling parameters again. In
general both values have changed.