Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 624 / 813

INITiate<Ch>... R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.162 E-6
HCOPy:PAGE:WINDow ACTive | ALL | SINGle
Defines the number of diagram areas per printed page.
ACTive Print only active diagram area.
ALL | All diagram areas are printed on one page.
SINGle One diagram area per page.
*RST value ALL
SCPI, Command Types Confirmed, command or query
Example:
H
COP:PAGE:WIND SING; HCOP
Select one diagram area per page and start printing.
INITiate<Ch>...
This subsystem control the initiation of the trigger system and defines the scope of the triggered
measurement.
INITiate<Ch>:CONTinuous <Boolean>
Qualifies whether the analyzer measures in single sweep or in continuous sweep mode.
<Ch> Channel number. The channel is ignored because the command
affects all channels.
<Boolean>
ON - The analyzer measures continuously, repeating the current
sweep.
OFF - The measurement is stopped after the number of sweeps
defined via
[SENSe<Ch>:]SWEep:COUNt
. INITiate<Ch>[:IMMediate]
initiates a new measurement cycle.
*RST value ON
SCPI,
Command
Types Confirmed, command or query
Example:
*RST; INIT:CONT OFF
Activate single sweep mode for channel no. 2.
INIT:SCOP SING
Define that a single sweep will be performed in channel no. 2 only.
CALC2:PAR:SDEF 'TRC2','s11'; INIT2
Create channel no. 2 with a new trace and start a single sweep in
channel no. 2.
INITiate<Ch>[:IMMediate]
Starts a new single sweep sequence. This command is available in single sweep mode only
(INITiate<Ch>:CONTinuous OFF). The data of the last sweep can be read using