Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 658 / 813

SENSe R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.196 E-6
Example:
CORR:CKIT:INST
'C:\Rohde&Schwarz\NWA\Calibration\Kits\ZCAN.ck'
Load the previously created ZVR cal kit file ZCAN.ck
from the default cal kit directory.
MMEM:STOR:CKIT 'ZCAN',
'C:\Rohde&Schwarz\NWA\Calibration\Kits\ZCAN.calkit'
Store the imported cal kit data to a NWA cal kit file
ZCAN.calkit (assuming that the cal kit name stored in
ZCAN.ck reads ZCAN).
[SENSe:]CORRection:COLLect
[SENSe<Ch>:]CORRection:COLLect...
This subsystem controls the system error correction and manages calibration kits.
[SENSe<Ch>:]CORRection:COLLect[:ACQuire] THRough | OPEN1 | OPEN2 |
OPEN12 | SHORT1 | SHORT2 | SHORT12 | MATCH1 | MATCH2 | MATCH12 | NET |
ATT | IMATCH12 | REFL1 | REFL2 | SLIDe1 | SLIDe2 | SLIDe12 | LINE1 | LINE2 |
M1O2 | O1M2 | M1S2 | S1M2 | OSHort1 | OSHort2
Starts a calibration measurement in order to acquire measurement data for the selected standards. The
standards are reflection or transmission standards and must be connected to port 1 or 2 of the
analyzer.
Use the generalized command
[SENSe<Ch>:]CORRection:COLLect[:ACQuire]:SELected
to obtain measurement data at
arbitrary analyzer ports.
<Ch> Channel number of the calibrated channel. If unspecified the numeric
suffix is set to 1.
Parameters Standard types: Through, Open, Short, Match (MATCH12 and
IMATCH12 are synonymous), Symmetric Network (NET), Attenuation
(ATT), Reflect, Sliding Match (SLIDe), Line, Match/Open (M1O2,
O1M2), Match/Short (M1S2, S1M2), Open/Short (OSHort)
.
The numbers in the parameters denote the analyzer ports. Two
numbers 12 mean that two separate calibrations are performed at ports
1 and 2.
*RST value –
SCPI,
Command
Types
Confirmed (with device-specific standards), no query
Example:
See [SENSe<Ch>:]
CORRection:COLLect:SAVE .