Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 680 / 813

SENSe R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.218 E-6
[SENSe<Ch>:]FREQuency:CONVersion:AWReceiver[:STATe] <Boolean>
Qualifies whether a waves are measured at the source or at the receiver frequency. The setting is
relevant for all frequency-converting measurements.
<Ch> Channel number.
<Boolean>
OFF - Measurement at source frequency
ON - Measurement at receiver frequency
*RST value OFF
SCPI, Command Types Device-specific, command or query.
Example:
FREQ:CONV:AWR ON
Measure a waves at the receiver frequency.
[SENSe<Ch>:]FREQuency:CONVersion:HARMonic:ORDer <order>
Selects the order of the harmonic measured if a harmonic measurement is enabled
(
[SENSe<Ch>:]FREQuency:CONVersion HARMonic
).
<Ch> Channel number.
<order> Order of the harmonic, integer multiple of the fundamental
frequency measured.
Range [def. unit] 2 to 100 [–].
*RST value 2
SCPI, Command
Types Device-specific, command or query.
Example:
See [SENSe<Ch>:]FREQuency:CONVersion
[SENSe<Ch>:]FREQuency:CONVersion:HARMonic:RELative <Boolean>
Enables or disables the relative harmonic measurement where the harmonic is divided by the
fundamental wave.
With enabled relative measurement the analyzer creates a new channel and a new
(mathematical) trace; see program example for
[SENSe<Ch>:]FREQuency:CONVersion
.
<Ch>
Channel number.
<Boolean> Enable (ON) or disable (OFF) the relative harmonic
measurement.
*RST value OFF
SCPI, Command
Types Device-specific, command or query.
Example:
See [SENSe<Ch>:]FREQuency:CONVersion