Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 635 / 813

R&S
®
ZVA/ZVB/ZVT MMEMory...
1145.1084.12 6.173 E-6
Example:
MMEM:STOR:CORR 1,'Calgroup1.cal'
Copy the current correction data set of channel 1 to
a cal group file Calgroup1.cal.
CONF:CHAN2:STAT ON; :MMEM:LOAD:CORR
2,'Calgroup1.cal'
Apply the stored correction data to channel 2.
MMEM:LOAD:CORR:RES 2,'Calgroup1.cal'
Undo the previous action: Resolve the link, causing
channel 2 to use its previous correction data.
MMEM:DEL:CORR 'Calgroup1.cal'
Delete the created cal group file.
MMEMory:LOAD:CORRection:RESolve <Ch>[,'<file_name>']
Resolves the link between channel <Ch> and the correction data set (cal group file) so that the channel
uses its previous correction data.
<Ch>
Channel number
'<file_name>' Optional string parameter to specify the name of the cal group file.
Cal group files must have the extension *.cal. The directory path
must not be specified
.
If there is no link between <Ch> and the specified file, the command
has no effect. If no file is specified, the command resolves any link
between <Ch> and an arbitrary cal group file.
*RST value –
SCPI,
Command
Types
Device-specific, no query.
Example:
See MMEMory:LOAD:CORRection
MMEMory:LOAD:LIMit '<trc_name>','<file_name>'
Loads a limit line definition from a specified file and assigns it to a trace with a specified name. Limit
lines are created using the
CALCulte<Ch/Tr>:LIMit...
commands.
'<trc_name>'
Name of an existing trace in the active setup (string parameter). The
imported limit line is assigned to this trace, irrespective of the trace
information in the limit line file.
'<file_name>'
String parameter to specify the name and directory of the limit line file to
be loaded. The default extension (manual control) for limit line files is
*.limit, although other extensions are allowed. If no path is specified the
analyzer searches the current directory, to be queried with
MMEMory:CDIRectory?
.
*RST value –