Rohde & Schwarz 1145.1010.04/05/06, Руководство по эксплуатации

Страница: 600 / 813

DISPlay... R&S
®
ZVA/ZVB/ZVT
1145.1084.12 6.138 E-6
DISPlay:WINDow<Wnd>:MAXimize <Boolean>
Maximizes all diagram areas in the active setup or restores the previous display configuration.
<Wnd> Number of the diagram area to become the active diagram area.
DISPlay:WINDow<Wnd>:MAXimize
acts on all diagrams of the
current setup, however, the diagram no. <Wnd> is displayed on top of
the others.
<Boolean> ON | OFF - Maximize all diagram areas or restore the previous display
configuration.
*RST value OFF
SCPI,
Command
Types
Device-specific, command or query (returns whether or not the
diagrams are maximized).
Example:
*RST; DISP:WIND2:STAT ON
Create diagram areas no. 1 (with default trace) and 2 (with no trace).
DISP:WIND2:MAXimize ON
Maximize the diagram areas, placing area no. 2 on top.
DISPlay:WINDow<Wnd>:STATe <Boolean>
Creates or deletes a diagram area, identified by its area number <Wnd>.
<Wnd> Number of the diagram area to be created or deleted.
<Boolean>
ON | OFF - Creates or deletes diagram area no. <Wnd>.
*RST value –
SCPI, Command
Types Device-specific, command or query (returns whether or not a
particular diagram area exists).
Example:
CALC4:PAR:SDEF 'Ch4Tr1', 'S11'
Create channel 4 and a trace named Ch4Tr1 to measure the input
reflection coefficient S11.
DISP:WIND2:STAT ON
Create diagram area no. 2.
DISP:WIND2:TRAC9:FEED 'CH4TR1'
Display the generated trace in diagram area no. 2, assigning the
trace number 9 to it.